HT Effects Pedals
Blackstar HT Effects Pedals
Introducing HT Effects Pedals
Combining real valve tone with the flexibility of digital technology these pedals deliver eight stunning reverb, delay or modulation effects.
True High Voltage
The pedals operate on a 300V DC anode supply voltage (High Tension voltage). This is the same used in traditional valve amplifier design and means the circuit has all the compression and distortion characteristics associated with a true valve amp design and therefore 'cleans up' in the same way when you back off the volume on your guitar.
8 Authentic Effects
Reverb, Delay or Modulation
Combining real valve tone with the flexibility of digital technology these pedals deliver eight stunning reverb, delay or modulation effects. The pedals effects range from reverb effects like hall, spring and gate, through modulation effect such as tremelo and flange and into delay effects such as space and tape effects.
Pure Valve Saturation
The high voltage valve design of the HT Effects pedals means that they produce true valve dynamics and feel. The valve circuit works with the saturation / dwell control to affect the amount of valve compression and harmonics are present on any of the effects.
Dwell / Saturation
Control The Harmonics
By adjusting the drive to the high voltage valve circuit in the effect side chain, the Dwell / Saturation control affects the amount of valve compression and harmonics present in the effect. The led beside the control changes from green (not driving the valve) to red (driving the valve) depending on where you have the control set and how hard the guitar is played.