HT-1RH Overview

The HT-1RH is the perfect amp, packing all the great tone and innovative features of the award-winning HT-5 valve amp into a 1 Watt format. The patented ISF (Infinite Shape Feature) circuit gives you infinite adjustment over the characteristics of the tone control network and takes you from the USA to the UK and anywhere in between. Add a fully specified speaker emulated output, MP3/ Line Input and you have everything you need for recording or practicing.

  • Innovative 1 Watt valve head
  • 1xECC83 and 1xECC82
  • Unique push-pull power amp design
  • Based on award winning HT-5
  • Two channels
  • Patented Infinite Shape Feature (ISF)
  • Perfect for studio or practice
  • Speaker emulated output
  • Stereo MP3 / Line input
  • External speaker output
  • Stereo Reverb

Further Info

  • 1 Watt, Push-Pull Design

    The HT-1 power amplifier is a low powered push-pull design which produces the crunch and break-up characteristics of a traditional 100W output stage but at a much lower volume. This is achieved by the use of an ECC82 dual triode in push-pull configuration producing 1 Watt output, which is rich in valve harmonics and compression, sounding full and toneful even at the lowest volume level.

    Two Channels

    The HT-1 has two channels available for selection, a Clean channel and an Overdrive channel. Using the Gain control while on the Clean channel you are able to deliver everything from a clean sound through to a crunch tone. Alternatively you can select the Overdrive channel and again using the Gain control, change from a clean sound on the edge of breakup right through to a distorted lead tone.

    Digital Reverb

    The reverb control sets the overall level of the reverb effect. With the control fully counter clockwise there will be no reverb. Turning the control clockwise will increase the amount of reverb.

    ISF Control

    The ISF control works in conjunction with the Tone control. It allows you to choose the exact tone signature you prefer. Fully CCW is a more American characteristic with a tight bottom end and more aggressive middle, and fully CW is a British characteristic which is more ‘woody’ and less aggressive.

    Speaker Emulated Output

    The Blackstar emulated output design is a new benchmark for pro direct recording. This no-compromise design makes it easy to get your tone to disk and tape. You can also use it to run a line out to a PA.

  • General
    Product Range HT-1
    Model HT-1RH
    Technology Type Valve
    Preamp Valves 1 x ECC83, 1 x ECC82
    Poweramp Valves
    Wattage 1
    Inputs Guitar Input, MP3/Line Input
    Controls Gain, Overdrive Select, Volume, ISF, Speaker Emulated Output and Headphones, MP3/Line In, Reverb
    Channels 2 - Clean, Overdrive
    Weight 4KG
    Dimensions (Width x Height x Depth) 308 x 305 x 172 (mm)

Related Products