Studio 10 Guitar Amps

Plug in to discover your ultimate single-ended valve tone

Influenced by history’s most iconic amplifiers, three new 10W single-ended valve amplifiers have been developed each with a different power valve: KT88, EL34, or 6L6.

The feel, dynamics and natural compression of these small single-ended valve amps has to be experienced. The instant response and feedback you get when playing, create a direct connection between your fingers and the speaker and fuel your performance.

The Studio 10’s simple controls allow you to quickly and easily dial in classic tones. From chimey cleans to musical, smooth overdrives that clean up beautifully when you roll off your guitar volume. At 10 Watts they each deliver stunning tone even at low volumes.

To capture the true sonic experience of the power valves driving, or breaking up when driven the Emulated Output is take after the power stage. Every nuance of your sound can be easily recorded or run through a PA for larger venues.

With a seamless blend of classic tone and boutique-inspired design, each amplifier takes its place alongside some of the world’s most revered studio amplifiers.

Studio 10 EL34 Handbook Studio 10 6L6 Handbook Studio 10 KT88 Handbook

Studio 10 Features

Simple Controls for boutique tone

EL34, 6L6 and KT-88 single-ended power valves for low power drive

Footswitchable Boost or Drive

Post power stage speaker emulated output

12 Inch iconic British Celestion loudspeaker

Choose Your Amp

Studio 10 EL34
Watch Video View Handbook

The elegant Studio 10 EL34 is a low gain, classic British crunch amp with an EL34 in the power amplifier and an ECC83 in the preamp stage, resulting in a flawlessly boutique, sultry crunch. This model includes a footswitchable pre-amp Boost for an authentic classic rock and indie rhythm tone and articulately powerful blues leads.

Front Panel Features:
- Input Sockets
- Volume
- Boost
- Tone
- リバーブ
- Master
- Standby
- Power
Rear Panel Features:
- Emulated Output (Mono, taken after the power amp)
- Series effects loop
- Effects level switch
- Footswitch (Supplied 1-button to activate boost feature, or use an optional 2-button for boost or overdrive and reverb)
- Mains in
- 3 speaker outputs - 1 x 16 Ohm, 1 x 8 Ohm and 2 x 16 Ohm
Studio 10 6L6
Watch Video View Handbook

Studio 10 6L6 deploys a 6L6 output valve and an ECC83 in the preamp stage to give this amp a distinctively American bright clean sound and searing lead tone. The built-in overdrive circuit - inspired by our renowned HT-Drive pedal - takes the lead tone from dynamic crunch to a singing, smooth legato and remains composed and graceful.

Front Panel Features:
- Input Socket
- Gain
- Drive
- Tone
- リバーブ
- Master
- Standby
- Power
Rear Panel Features:
- Emulated Output (Mono, taken after the power amp)
- Series effects loop
- Effects level switch
- Footswitch (Supplied 1-button to activate boost feature, or use an optional 2-button for boost or overdrive and reverb)
- Mains in
- 3 speaker outputs - 1 x 16 Ohm, 1 x 8 Ohm and 2 x 16 Ohm
Studio 10 KT88
Watch Video View Handbook

Studio 10 KT-88 is driven by the monumental KT-88 power amp valve and an ECC83 in the preamp stage. Benefitting from the extra headroom of the KT-88, the Studio 10 KT-88 is the pinnacle of dynamic modern cleans and tight high-gain overdrives. In addition, the patented ISF control gives unparrelled access to more distortion flexibility than any other single-ended valve amplifier on the market.

Front Panel Features:
- Input Socket
- Gain
- OD
- ISF
- リバーブ
- Master
- Standby
- Power
Rear Panel Features:
- Emulated Output (Mono, taken after the power amp)
- Series effects loop
- Effects level switch
- Footswitch (Supplied 1-button to activate boost feature, or use an optional 2-button for boost or overdrive and reverb)
- Mains in
- 3 speaker outputs - 1 x 16 Ohm, 1 x 8 Ohm and 2 x 16 Ohm