Artisan 30H
Artisan 30H Overview
- Class A 30W head
- Switch for 10W triode mode / 30W pentode mode
- 4 x EL84 output valves
- EF86 channel with 5-way Bass Shape switch
- ECC83 channel with 2-way Voice switch and Master Volume
- Hi and Lo inputs perfect for channel blending
- Impedance selector
Further Info
-
General Product Range Artisan Series Model Artisan 30H Technology Type Valve Valves Preamp Valves ECC83, EF86 Poweramp Valves 4 x EL84 Electronics Wattage 30 Inputs Hi Input, Low Input for each channel Controls Channels 2 - Channel 1 – The ECC83, Channel 2 – The EF86 Channel Dimensions Weight 17.3KG Dimensions (Width x Height x Depth) 715 x 289 x 208.5 (mm) -
Handwired
Each Artisan amplifier is designed to offer the widest range of classic vintage and boutique tones to the highest possible sonic standard. This is achieved by the design of electronics circuits that work in harmony with the finest components and materials available. All the designs are simple in their operation and yet deceptively flexible in their functionality.
Switch 10W triode mode / 30W pentode mode
In pentode mode the power amplifier has a dynamic response which is rich in bell like harmonics and has a beautiful ringing top end. The triode mode allows the generation of the critical power amplifier harmonic distortion at a much lower volume but is darker and more mellow sounding with a rounder top end. The lower power setting is particularly effective for home and studio use.
Channel Blending
The Artisan's topology allows the blending of the two channels. By paralleling the guitar connection to the inputs of Channel 1 and Channel 2 endless tonal variations can be explored. Use the hi input if you wish to achieve power amplifier break-up and overdrive. Use the lo input if you wish the amplifier to remain clean (this is especially useful if the guitar used has high output pick-ups).
Impedence Selector
The control matches the amplifier's impedance to that of the connected speakers. Always ensure that the selected impedance matches that of the internal and/or external speaker cabinets. (if combo). The Artisan's (combo only) internal speaker is 16 Ohms, so when used by itself the Impedance Selector must be set to 16 Ohms. If an additional 16 Ohm speaker cabinet is used together with the internal speaker the Impedance Selector should be set to 8 Ohms. A speaker cabinet of less than 16 Ohms should not be used together with the internal speaker. (show diagram of the speakers possible)
Welded Steel Chassis
The Artisan range represents quality. This is reflected in the fact that the amplifier uses a welded steel chassis for strength and durability as well as overall quality.