Series One 1046L6
Series One 1046L6 Overview
Setting new standards in tonal flexibility, the deceptively simple preamp section has four world-beating channels (6 modes) which are further augmented by dual ISF controls.
- 100 Watt head with built-in DPR power reduction
- 4 x ECC83, 1 x ECC82, 4 x 6L6 valves
- 4 switchable channels
- Clean channel with Warm (Plexi) and Bright (Class A) type modes
- Crunch channel with Crunch and Super Crunch modes
- Two overdrive channels with high and low output damping
- Two ISF equipped tone control sections
- Presence and resonance controls
- Master Volume
- Series effects loop
- MIDI switching
- Speaker emulated output
General Product Range Series One Model Series One 1046L6 Technology Type Valve Valves Preamp Valves 4 x ECC83, 1 x ECC82 Poweramp Valves 4 x 6L6 Electronics Wattage 100 Inputs Guitar Input Controls Clean Gain, Clean Volume, Crunch Gain, Crunch Volume, Overdrive 1 Gain, Overdrive 1 Volume, Overdrive 2 Gain, Overdrive 2 Volume, Bass x 2, Middle x 2, Treble x 2, ISF x 2, Resonance, Presence, Master Volume, DPR Channels 4 - Clean, Crunch, OD 1, OD 2 Dimensions Weight 27.2KG Dimensions (Width x Height x Depth) 705 x 285 x 278.5 (mm)
The ISF control works in conjunction with the Tone control. It allows you to choose the exact tone signature you prefer. Fully CCW is a more American characteristic with a tight bottom end and more aggressive middle, and fully CW is a British characteristic which is more ‘woody’ and less aggressive.
The DPR system allows you to vary the amplifier output down to 10% of its rated power without any loss in tone or valve reliability. Pure valve output distortion and compression at any volume - a dream come true.
The Series One offers the ability to control channel selection via MIDI Program Change messages and interfacing with most MIDI controllers is a straight forward process. The Series One can be placed in a MIDI chain allowing you to simultaneously select a channel on the amplifier and change the patch on a MIDI effects processor connected to the effects loop. There are 128 available Program Changes, giving you the possibility to access a vast number of tonal combinations.
All Series One amplifiers have plated through double sided PCBs for the increased mechanical integrity this construction affords. Designed to last a lifetime, Series One cabinets have a 18mm finger-jointed birch ply cabinet and heavy gauge wiring. The chassis, for mechanical integrity, are seam welded 1.6mm steel.
Speaker Emulated Output
The Blackstar emulated output design is a new benchmark for pro direct recording. This no-compromise design makes it easy to get your tone to disk and tape. You can also use it to run a line out to a PA.
The amp features an effects loop to allow you to connect effects pedals or other professional equipment using the return and send connections. The Effects Loop Level switch sets the effects loop to either +4dBV/-10dBV, which enables you to use it with either professional equipment (+4dBV setting), or with guitar level effects such as effects pedals (-10dBV setting).