ID60 head and cab question !

Discussion - ID:Series amplifiers.
Post Reply
Lszq.23
Posts: 1
Joined: Wed Oct 29, 2014 5:28 am

Wed Oct 29, 2014 5:40 am

Hi guys I recently purchased ID 60 head together
with a orange Ppc 112 which is 16ohms 60watt cab.
It is my first time buying an amp head and a cab, I have little to 0 knowledge about
The technical stuff about them.

So..
I am thinking of buying another ppc 112 to add into my half stack .
But I am not sure if I will damage the amp head, the impedence of the amp
Said its must be not less than 4ohms. So can I just connect two of the ppc 1x12
Into my ID60 head ?

Thanks in advance !

User avatar
myk.robinson
Posts: 253
Joined: Mon Oct 22, 2012 7:02 pm
Contact:

Wed Oct 29, 2014 1:08 pm

Two 16 ohm cabinets, assuming they are in parallel, will be 8ohms. It will be fine.

garciamo
Posts: 6
Joined: Mon Dec 15, 2014 4:34 am

Wed Jun 15, 2016 5:31 pm

Anyone has this setup? I'm thinking about this setup but I would like to know if its good. Thanks!

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 3 guests