I opened my HT-60 to check out the guts...

Discussion - HT Venue amplifiers. Inspiration from Studio to Stage.
Post Reply
apw100
Posts: 44
Joined: Mon Jan 03, 2011 1:00 am
Location: Jacksonville, FL USA
Contact:

Wed Feb 23, 2011 5:31 am

I took a lot of photos of the boards inside the chassis, I am debating whether I should upgrade some of the components.
Image[/url][/img]

Hendog
Posts: 12
Joined: Tue Feb 22, 2011 1:00 am

Thu Feb 24, 2011 2:52 am

Can someone chime in and comment on the quality of this and anything that looks like it should be upgraded?

Hendog
Posts: 12
Joined: Tue Feb 22, 2011 1:00 am

Thu Feb 24, 2011 2:53 am

Oh, thanks for the pic, OP!

apw100
Posts: 44
Joined: Mon Jan 03, 2011 1:00 am
Location: Jacksonville, FL USA
Contact:

Thu Feb 24, 2011 6:34 am

Hendog wrote:Can someone chime in and comment on the quality of this and anything that looks like it should be upgraded?
Well, the resistors are all SMT, so they would be difficult to replace. Probably the biggest improvement would be made by replacing the capacitors. The ones that come standard are pretty mediocre Samyung models. I might replace them with some SoZo caps. Here is a better photo of the main board and caps....

Image[/img]

Jono82
Posts: 74
Joined: Sat Aug 28, 2010 12:00 am

Fri Feb 25, 2011 12:00 pm

I don't know alot about this stuff but I read somewhere upgrading the transformer on these would be a good upgrade to make it more closer to hi end expensive amps.

An experienced amp tech would probably be a better person to ask.

Post Reply
  • Information
  • Who is online

    Users browsing this forum: Majestic-12 [Bot] and 16 guests