Page 1 of 1
HT-20R Mkii speaker bypass with headphone
Posted: Thu Apr 18, 2019 4:26 pm
Does anyone know how the speaker is muted when using emulated out with headphones. My current HT 5R has a standby switch and these new mkii’s dont. I tested an ht20r mkii yesterday at guitar center and had to unplug the speaker in order to mute it and only hear through headphones.
Re: HT-20R Mkii speaker bypass with headphone
Posted: Fri May 10, 2019 8:17 pm
Just got my HT-20RH a couple of days ago. Based on my observations:
The Master Volume control controls the volume of the speaker outputs only.
The channel volumes control the volume to the headphones, line and emulated outputs.
You can therefore turn the master volume down to zero and still have signal out to a mixer etc.
Furthermore, you don't need a speaker connected for the headphone/line/XLR outs to still have a signal, so you can just use the head out to a mixer if you wanted.